隔膜真空泵主要用于多種容積機械真空泵的密封和潤滑,及機械增壓真空齒輪傳動系統的潤滑,也主要用于通常壓縮機油不能滿足高度真空的使用狀況。長久在高溫標準下與空氣、樹脂、化學原料等直接觸碰亦不容易變質,降低有害漆膜和油垢的產生,出示較長的換油周期。
在選擇隔膜真空泵時需要考慮以下幾點:
1、確定工作真空范圍先必須檢查確定每一種工藝要求的真空度。因為每一種工藝都有其適應的真空度范圍,必須認真研究確定之。
2、確定極限真空度在確定了工藝要求的真空度的基礎上檢查真空泵系統的極限真空度,因為系統的極限真空度決定了系統的*工作真空度。一般來講,系統的極限真空度比系統的工作真空度低20%,比前級泵的極限真空度低50%。
3、其選擇計算s=2.303v/tlog(p1/p2)其中:s為抽氣速率、v為真空室容積、t為達到要求真空度所需時間、p1為初始真空度、p2為要求真空度。
4、真空容積檢查確定達到要求的真空度所需要的時間、真空管道的流阻與泄漏??紤]達到要求真空度后在一定工藝要求條件下維持真空需要的抽氣速率。
5、被抽氣體種類與抽氣量檢查確定工藝要求的抽氣種類與抽氣量。因為如果被抽氣體種類與泵內液體發生反應,泵系統將被污染。同時必須考慮確定合適的排氣時間與抽氣過程中產生的氣體量。
希望上述內容能夠幫助大家更好的了解本產品,同時也歡迎大家持續關注本站,小編會(huì )定期為大家帶來更多的相關產品知識介紹。