隔膜真空泵是指利用機械、物理、化學或物理化學的方法對被抽容器進行抽氣而獲得真空的器件或設備。通俗來講,是用各種方法在某一封閉空間中改善、產生和維持真空的裝置。隨著真空應用的發展,其抽速從每秒零點幾升到每秒幾十萬、數百萬升。具有高強度的機械性能,解決了普通產品存在的磁渦流現象,適用于化工、制藥、石油化工等行業腐蝕性氣體的處理,如抽濾、真空蒸餾、旋轉蒸發、真空濃縮、離心濃縮、固相萃取等。
安裝隔膜真空泵時要注意保證有效的連接,下面就請大家跟著小編一起來看一看:
1、用聚酯絕緣膠帶,纏繞時,按住半圈,纏繞8-12層。用塑料膠帶包裹兩層以加固強度。
2、剝去約30-35毫米長的電纜銅芯,用砂布擦拭銅線,使其發亮。還要將外接三芯電纜的銅線剝開30-35mm,用砂布擦拭干凈,將三芯電纜的銅線插入剝開的外接電纜,然后用細銅線扎緊。把剩下的剪掉,用剪刀弄平,防止刺傷。
3、三個接頭應使用焊料熔接,接頭表面應光滑,無毛刺和假焊。如果熔接不穩固或不順利,應該重建,直到滿足要求。
4、用塑料膠帶把這三股纏在一起,分成兩層。該層在每根電線絕緣層末端上方50毫米以上,二樓以上50毫米。
5、包好后,取一壺冷水,將包好的線浸泡在水中。12小時后,用500伏兆歐表測量絕緣。在符合要求之前,不要重新包裝。
6、接地線也應按潛水電纜連接技術要求包扎。
7、手動干油泵接入線路后,下井時絕緣電阻會(huì )不斷震蕩,觀察變化,防止電纜絕緣皮在井壁破裂。如果發現絕緣迅速下降到0.5兆歐以下,應提起該裝置以檢測原因。